Live photos help you carefully check and accept, f

  • Detail

Entering the peak decoration season, many owners and prospective owners have launched preparations for the decoration of new houses. What people who first decorate lack most is "practical" experience, and it is difficult to predict some problems that will appear in the process of decoration

it has entered the peak decoration season again, and many owners and prospective owners have successively launched preparations for the decoration of new houses. What people who first decorate lack most is "practical" experience, and it is difficult to predict some problems that will appear in the process of decoration. In view of this, all kinds of construction and quality problems that are easy to occur in the process of home decoration are combined with on-site photos to vividly display the decoration details, so that more netizens who are about to decorate can learn from them

1. The wall and floor tiles are not jointed, and the wall tiles do not press the floor tiles

the wall and floor tiles are not jointed, resulting in excessive gaps between the floor tiles and the corners. Another situation is that the wall tiles fail to press the floor tiles, resulting in gaps at the junction of the wall and floor tiles. These conditions are caused by the poor construction quality during the construction process

experts remind: the gap between the wall and floor tiles is too large, which is a common problem in room decoration. Although this situation can be repaired later, it will cause unsightly joints of wall and floor tiles

the nozzle of the heating pipe was completely exposed before heating, and no corresponding protection was provided

experts remind: there are many materials on the construction site, and the nozzle of the heating pipe is not protected. Once a heavy object touches the nozzle of the heating pipe, it is likely to cause deformation of the nozzle, and water leakage occurs after the heating is installed, affecting the floor

2. Connect wires privately

when wiring wires in house decoration, connect wires casually

experts remind: to avoid these situations, first of all, hire an experienced electrician. Secondly, when wiring, the plastic sheathed wires or other insulated conductors used should be protected through pipes and cannot be directly buried in the cement or lime plaster layer. Because the conductor directly buried in the wall has been "dead" in the wall and cannot be pulled out or moved. Once a certain section of the line is damaged and needs to be replaced, the wall can only be chiseled and rewired. When changing the line, there can be no joint in the middle, because the joint is directly buried in the wall. With the passage of time, the insulating tape at the joint will age, and long-term burial in the wall will cause electric leakage. Therefore, do not violate the specifications and connect wires randomly to avoid potential accidents such as leakage

3. Do not replace the broken wall tiles

small holes and damages can be seen on some wall tiles, but the construction team is too troublesome to replace them in time

experts remind: be careful when accepting wall tiles, and replace the damaged wall tiles in time to avoid affecting the overall beauty of the wall

4. Violation of construction safety regulations on the construction site

in addition to finding that some heavy objects are stacked in a corner of the room, it is also found that the ladder used for construction has not been fixed, and there are also constructors smoking while working on the construction site

experts remind: in order to protect the personal safety of construction personnel, ladders should be fastened with safety ropes. The ladder foot is covered with anti-skid materials, which can not only avoid accidental injuries such as ladder falling and personal injury when working on the smooth ground, but also effectively protect the floor tiles or floor materials from wear and tear. In addition, it should be emphasized that there are many materials on the construction site. In order to prevent fires, smoking is strictly prohibited

5. The construction quality of non-compliance with the specifications is poor

many places that do not comply with the specifications are also found, and the common ones are mainly that the gap between the lintel and the door frame exceeds the specifications. There are no joints between the wall tiles, or even staggered joints, the gap between the ceiling inspection opening is too large, the edge sealing is not straight, the gap between the floor tiles and the sliding door frame is too large, and the internal and external corners are not vertical

experts remind that the construction should be carried out in strict accordance with industry norms

6. Cut corners

do not leave enough length when installing the TV cable. The materials of the pass are replaced by crushed materials

experts remind: insufficient length of TV cable will affect the use of electrical appliances after check-in; The pass should be a whole plate, no more than 2 at most

7. The uncivilized construction site is messy

stack some decoration garbage casually or pour it into sewers, toilets and other places

experts remind: don't pour waste materials into the toilet, which is easy to cause sewer blockage

>& gt;& gt; Link: don't let regrets fill your new home in winter decoration




Copyright © 2011 JIN SHI